Thursday, June 9, 2011

How To Replace the Tail on Your Ultra Micro Corsair




With a number of flights on your Corsair, you may find that perhaps it just doesn't look as nice as it did when it was new. Corsairs were the prize of the Navy and Marines back in their day, and should be one of your prize birds as well. A little battle-worn from those sorties out behind the tree or around the house, your Corsair needs to be ready for battle at a moment's notice. We'll walk you through what it takes to bring your Corsair back to life with new parts, a few basic tools and a few minutes in the shop.

Replacing the tail section on the Corsair is easy and only takes a few minutes to do. Follow these steps and you will have a new tail on that bird in no time - flying sorties and clearing the skies of any enemy micro warbirds in your neighborhood.

Wednesday, June 8, 2011

How To Replace Your Ultra Micro Corsair Wing



With a number of flights on your Corsair, you may find that perhaps it just doesn't look as nice as it did when it was new. Corsairs were the prize of the Navy and Marines back in their day, and should be one of your prize birds as well. A little battle-worn from those sorties out behind the tree or around the house, your Corsair needs to be ready for battle at a moment's notice. We'll walk you through what it takes to bring your Corsair back to life with new parts, a few basic tools and a few minutes in the shop.

Replacing the wing takes a little bit of work, but isn't that hard. We show you step by step what it takes to bring your Corsair back to life with a new wing. In just a few short minutes and some basic tools, we will help you get a new wing on that bird for the next flying session!on



It's May - And the Phoenix is at ETSA Park

I had intended beginning this month story with a picture of the present state of the Frequency Keyboard, such as was used for many years to make certain that we would not incur frequency clashes during the night. After giving the matter a very serious thought, in fact lots of them, I could not see the excitement of a picture, and good quality I assure you dear readers, of Michael Schneider’s sole key sitting, totally on its on, in the middle of a large table. Exciting? I don’t think so. Sad? Maybe just a tad. But as we move on the current situation made us all eternally grateful for 2.4gHz.

So friends, my first picture is on Andrew Pile, one of the many fliers these days who are gleaning enormous satisfaction from flying micro and ultra-micro models. Again a silent prayer for 2.4gHz as I watched no less than 5 or these tiny models flitting around the sky like a pack of horse flies – well controlled horse flies at that, I might add, but – oh! so fast. Then as I let the lens of my digi sweep along the “Pit Area” it picked up Wayne and Steve who had been busy preparing their two models – a Blade 400 and a tiny MSR. The MSR (Multi-roater) was the beginning of helicopter flying for many a person who had, previously to the exciting introduction of micro contra-rotating blades, thought it all to have been deeply hidden in the too hard basket.

Then, out of the blue, came a flock of micro-sized fixed wing aircraft – tiny aircraft that, apart from being quite aerobatic, flew at such a rapid rate that they became a bit of a problem for the eyesight of Senior Citizens. My third picture shows one of such models, in the Parkzone Ultra-Micro Trojan.


 I would dearly like to point out, at this point in the epistle, that, due to a malfunction of my “ever-before reliable digital camera” I have been forced to fall back on the photographic talents of my friend Mike O’Reilly for this month’s article attachments and suggest that he might sell a lot more from his thriving business, Model Flight on Goodwood Road, If he would kindly pose his models on a black background. The attached photo of the Trojan sitting on a foam box, resulted in a slight pay decrease for his current effort. In nailing one of our newer ETSA Park fliers, who posed for him with his Parkzone UM Sukhoi, shown proudly flaunting his wares in the next image, all was forgiven.  

Another Michael, (goodness me, they are becoming as popular as twin-rotored micro models) has been flying micro models, just about since their release and he can be seen here with his latest effort, a magnificent micro Corsair which astounded those who had time to watch, by, not only its enormous burst of speed but also of its apparent ease of controlling this delightful little model. If you have the slightest interest in indoor flying, this is the way to go. I say indoor for, whilst they are capable of performing outdoors a dead calm day would make the outing a lot more satisfactory. They are just sooooo light with their all-foam build.

I have included the next picture for one reason only. Yes, it is of a cool cat holding his ever-popular Blade 120SR. Now,” listen carefully for I will only say this once.” Let your eyes wander straight down under the “cat” and you will notice the tail feathers of the 120 and that the vertical fin is as far to the rear as it will go. For some reason, mine had moved itself well forward of this position. Now I must admit that there must be a reason for that cos it had been glued in that position. Just make sure that that little Empennage (wow I’m waxing all technical now) is located at that rear-most position and happy flying.

The usual word, that we have all heard before, and I quote, “Andys at it again!” That means, quite simply, that Andy Hollitt has lodged one of his many Foamies in the rafters at ETSA Park Netball Stadium. Not a difficult task for anyone. The hard part is in getting it down again and, in Andy’s usual skilful style, after several attempts, managed to dislodge it with just another foamy from his flock. It was met with much applause as it made a soft landing on the highly polished floor, many metres below. Well done, yet again Andrew.

As they say in the Navy – did and probably still do – “Now hear this.” There is to be a change of date for our September gathering at Indoor. Please make a note, wherever you do that sort of thing, that we meet, at the usual time of 8-30p.m. on September 29th. – I repeat September 29th. This is the last Thursday of that month and the change is for a special reason when we would like to see a great turnout of all classes. If it is electric power and runs on either air or wheels, we would like to see it on that night. The reason – ok, be patient. No doubt you have all heard of one of the major motoring events each year – The Bay To Birdwood Rally which attracts many hundreds of competitors. Well – we are to be a part of their “Cruising Classic Events” which are special events, organized to give the entrants something to do on either days or nights leading up to, and following the major event. They have been invited to visit ETSA Park that night to witness Indoor Flying and this is the first time in the history of that major outing for the motoring fraternity, that one of their support events has been conducted at night time. From our side, we will have one of, not only Australia’s leading Helicopter pilots, but probably world class and quite likely two of those. If you are bringing a wheeled vehicle, make sure it is four-wheel drive as two are not sufficient for that highly polished floor.

Now dear readers, in closing this story for the merry month of May, I visited the Jet Action at Monarto and, whom should I find there but the Managing Director of Model Flight and OMP, Michael O’Reilly who was busily re-fuelling his magnificent Viper Jet – a large model, almost three metres in length and just a tad below that in width. Now you know how I keep my job.

Hoping to see you all at Indoor at ETSA Park once more on June 16th where you will just pay ten dollars to have a night’s flying enjoyment.

Keep it safe – The Phoenix.

Monday, June 6, 2011

Electrix RC Ruckus 2WD Monster Truck Review



There are times when you want to go run an RC car or truck for the pure joy of running an RC car or truck. This allows you to forget about lap times, shock oils, gearing, tire inserts and just have fun. The Electrix RC Ruckus 2WD Monster Truck is a perfect example of a truck that is designed to simply be fun and durable. Much like its stadium truck cousin, the Circuit™, the Ruckus is designed for the beginner or casual RC'er in mind to be able to just have a ton of fun.

The Ruckus is a backyard basher through-and-through. The raised chassis allows it to get over obstacles that may hamper other trucks. The included 20T motor and 1800mAh Dynamite® Speedpack™ provides enough power to propel the Ruckus over the roughest terrain quite well. We charged up the stock battery and headed out to Eli Field to put the Ruckus through its paces. Between the different terrain options and the race track, we spent a pretty fun afternoon with the truck.



Speed Specs
Ruckus Monster Truck
Part Number: ECX2000 (Orange); ECX2100 (Green)
Vehicle Class/Type: 2WD Electric Monster Truck
Target Audience: Beginning and Casual Monster Truck Enthusiasts
Completion Level: RTR

Track Notes:
We've been waiting for the weather to break here, counting down the days to when we'd see temperatures over 50, no rain and winds to die down to under 40MPH gusts; it's been that sort of spring. Thankfully, we had a break in the weather and I was able to get out and thrash with the Ruckus.
Before I headed out, I only needed to do a minimum amount of prep work. Everything that I would need to get up and running came in the box including the battery pack, charger, transmitter and the AA's for the transmitter. I could have charged up the 1800mAh battery on my Dynamite Passport Ultra charger, but I decided to test out the included wall charger. After a few hours, the pack was completely charged and ready to roll. At the same time, I also charged up some extra 1800mAh Speed Packs to make sure that I would have an afternoon of fun ahead of me.
From the first squeeze of the trigger, the Ruckus didn't disappoint. It had a good combination of both bottom-end torque and top speed. I was even able to pop a few wheelies on high-bite surfaces. Whether I was running the truck on concrete, grass, gravel or dirt, the Ruckus felt at home in all environments and on all surfaces. I will admit to being a bit worried at how the Ruckus would handle taller grass as, while its motor is decent, tall grass could cause excessive drag that could hamper the truck. I was relieved that this wasn't an issue though, as the Ruckus was able to get over everything I threw in its way. I learned very quickly to not underestimate this truck.
The handling of the Ruckus was pretty good on all surfaces. Often 2WD monster trucks suffer from excessive chassis roll or don't handle all that well, but the Ruckus doesn't have this issue. The chassis stays relatively flat while cornering and doesn't traction roll at the rate that other trucks can. Yes, it is still possible to traction roll the Ruckus, but you really need to try. Overall, this is a very good driving truck.

Top Speed/Acceleration
The 20T motor that comes with the Ruckus is the same motor that comes with the Circuit. I am thankful to see that the guys over at Electrix RC dropped the pinion size a few teeth to compensate for the larger tires of the Ruckus. I'd say the top speed was right around 20MPH when I was making speed runs. At the same time, the acceleration was pretty good too, as the Ruckus was able to get up and over just about anything in its path. Now don't be confused, the Ruckus won't set any land-speed records, but it's fast enough to be fun for beginners, but not so fast that it would be difficult to control.

Handling
Monster Trucks aren't renowned for their precise touring, car-style handling traits, but the Ruckus is honestly better than many other trucks out there. The normal tendency of these trucks is for them to be overly top-heavy and to suffer from excessive chassis roll. While the Ruckus isn't a race vehicle, it really drives quite well and outperforms expectations. If you really push things, you can get the truck to step out or get a little tippy, but overall the Ruckus doesn't drive like a traditional high CG monster truck.
On the dry track at Eli Field, I will admit that the Ruckus was more challenging to drive due to the loose nature of the dirt and the hard packed surface. I could slide the rear of the truck around if I got on the power too hard (think of it as a drift car on dirt!). Power slides were fun and controllable, and, if I wanted to settle the truck down a bit, I think I could have by simply packing the gear diff with some thick grease, but I was having far too much fun driving to worry about wrenching.

Jumping
One of the main reasons to buy an RC monster truck is to try to emulate the look and feel of their full-size counterparts. Monster trucks are known for catching wicked air and crushing anything in their path, and an RC monster truck needs to be able to recreate as much of that as possible. The Ruckus is a brilliantly fun truck to drive and it begs to be jumped. The suspension is very plush and I never felt like the Ruckus had bottomed out or ran out of suspension travel. While the jumps at the Eli Field track aren't ginormous, they were well shaped and gave me the opportunity to air the Ruckus out quite well. Again, it never failed to impress as I traversed a variety of different obstacles and jumps. The Ruckus begged to be jumped over and over and over again.

Off-Power
The sealed endbell 20T motor that the Ruckus comes with doesn't have the strongest magnets out there and, as such, the Ruckus has a tendency to keep rolling when you get off the throttle. Tapping the brakes delivers an instant burst of reverse since there isn't a delay, and you cannot disable reverse. Around the track, I found this a bit annoying, but when I was just running around in the open lot or on the dirt mounds, I didn't notice it one bit. Again, this is not a race truck and not designed to carve tight lines—it's designed to be fun to drive. If you need to get off the gas to get around a corner, the truck "whoa's" itself down nicely and makes it easy to turn and continue rolling along.

On-Power
The power delivery of the Ruckus is smooth and easy to get acclimated to on just about any surface. It's absolutely possible to break the rear tires free on loose surfaces like the track at Eli Field, sand or gravel, and doughnuts are fun and repeatable because of this. When the time comes to simply get rolling forward, the Ruckus has plenty of forward bite to get you moving along in any direction you desire. The included tires are also a bit softer than I initially expected, which can only help, but still provides the forward and site bite that you'll need when you're out just having fun.

Out-Of-The-Box Setup
One of the things I have most enjoyed and appreciated about the Electrix RC vehicles, is just how user friendly and easy to use the vehicles are for the person with little to no previous RC experience. The Ruckus is no different as it comes out of the box ready for tremendous RC fun. The design of the Ruckus begs to be driven hard on a variety of different surfaces and locations. The stock setup is well suited and balanced to this application. As I've mentioned, monster trucks tend to get a bit tippy, especially when changing directions at speed, but the Ruckus seems to borrow quite a bit from its stadium truck cousin the Circuit, as this is perhaps one of the most sure-footed 2WD monsters I've driven. This, more than anything else, is why I think the Ruckus is such a good vehicle for beginners. Instead of having to learn how to drive and control the truck, you can focus on just having fun and learning the basics of driving an RC vehicle.

Conclusion
I wish that trucks like these were available when I got started. From the durable construction materials and design, to the overall performance and handling, the Ruckus represents a great first step for anyone to get into RC. Beyond that, it's the perfect vehicle to share your passion of RC with too. While I may not want to hand the transmitter of my 1/8-scale buggy over to my kids, I have no such worries about letting them drive the Ruckus. I know that, not only can the Ruckus withstand the lack of driving skill they have, but that they can handle driving the truck and not become frustrated.
The Ruckus reminds me of a game I might download for my mobile device (stick with me here, I promise it'll be good). See, if I want to really get a great gaming experience, I power up my big screen and my HD gaming system and become totally immersed in that world. However, there are times when I want to just go and chill and have fun. And while I still get somewhat into the game on my mobile device, I know that it's there for those bite-sized portions. The same thing applies to RC. If I want to get my hardcore RC fix, I have my race vehicles for that application. However, there are times when I just want to go and get my bite-sized RC fix, which the Ruckus does a tremendous job of. Whether the Ruckus is your first RC truck, your twenty-first, or your one-hundred first, it's one of those vehicles you can't help but have a good time with.

Monday, May 30, 2011

Spektrum DX3C Preview


Spektrum has certainly brought a number of innovative features to RC'ers over the years. From the original DSM add-on module systems that freed people from frequency control and interference to the DX3 which introduced us to the first all-in-one Spektrum radio system. Spektrum has taken another leap forward in recent years with advancements like ModelMatch, DSM2 and Marine Technology. The time has come to bring these advanced features to the entry level crowd, all while mixing in a 20-model memory, computerized operation, exponential rates and much more. The result is the amazing DX3C which has features that far surpass its competition.

The DX3C may be classed as a beginner or entry-level radio but don't be fooled - there's a lot going on inside its case. Featuring a sharp and easy-to-read LCD display, scrolling selector operation, 20-model memory and integrated SD Card Slot just to name a few, the DX3C could be a contender for radio of the year- it's that good. Spektrum's Surface Radio Project Manager Blake Good paid us a visit to share some of the outstanding features this radio brings to the table.

Saturday, May 28, 2011

Losi 1/10-scale Short Course Buggy Preview


In the 1/10-scale off-road world Short Course Trucks have changed the landscape. SCT’s look like their full-scale counterparts, they’re fun and they are less hooked up than their stadium truck counterparts, bringing driving back into the equation. Losi has taken what they have learned in the world of short course trucks, sprinkled in some 1/10-scale buggy tech, and mixed in some full-scale buggy styling for their latest vehicle. It’s not hyperbole to state that this new vehicle could completely reshape the landscape of 1/10-scale buggies just as short course trucks have changed the shape of 1/10-scale trucks. I’m of course talking about the Losi 1/10-scale XXX-SCB.

The SCB, or Short Course Buggy, carries over quite a bit of SCT tech, however, just calling it a short course truck with a different body ignores many of the details that have gone into this car. The XXX-SCB features an all-new, super-narrow chassis that, when combined with its body, eliminates the parachuting effect that can plague short course trucks. The XXX-SCB also features a narrow front shock tower, designed to fit under the body. Speaking of the body the XXX-SCB will be available in three different trim schemes, ReadyLift, Rockstar and Stronghold. Check out our video below to see what makes this one of the coolest vehicles we’ve had our hands on in a long time.

Friday, May 27, 2011

Indoor at Easter Time

I have often been guilty of saying that our indoor flying crowd are unpredictable, as far as attendance numbers are concerned and this last evening was typical of that belief. With most people already on the road for their Easter break, it was expected that ‘La Fenice’ would be the only person there. Low and behold, they came in their droves in what could well have been a record number. Showing even more brightness in these dim times was the presentation to us, of the largest flying space we have ever endured at ETSA Park. Our home netball team are due to play their arch rivals, The Magic, this same weekend so all the surrounding, and moveable seating had been put in place in readiness for their huge match and the electrically moveable bank of seats,  previously (and usually) squashed up against the back wall like a huge concertina had been rolled into place, forming one very large grand stand.

One of the advantages of our sport, like many others, is that it is a wonderful opportunity for dads to take members of their family with them and, possibly have them become involved in the actual flying. One such group are the Chapple father and son couple who come down from Berri when possible and, the son, Matthew is one of the most accomplished pilots of, not only models, but also with a full-size Jabiru aircraft going solo after just 8 hours flying. His model flying is always a joy to witness with his dedicated father, never more than a metre away, always willing to tell of Matthew’s accomplishments.

Matthew Waye, the only Model Flight Staff representative on this night was as usual, employed in instruction where and when required, including with another father/son combination; Vin Pike and son Benjamin.

Benjamin amused himself with a small rubber powered model, which he quite successfully launched from the top tier of the very high grandstand.

The Mt. Barker mob, consisting of Alexis Scott and his very accomplished model flier son, Hamish flew a variety of models, Alexis putting “The Beast” through its fantastic manoeuvres, while Hamish was forced to spend considerable time repairing a “foamie” which had almost become a heap of rubble. We again saw it flying before our flying time had expired.

Alexis, the father, caught my eye standing behind a young lad and Alexis is busily engaged in putting “The Beast” through its interesting and exciting paces. Kneeling down was a very busy Hamish, the son, hard at work repairing his foamy so as to enable some more flying before we close. This may be the time to mention a rather tricky subject – that of our departure at the end of a nights entertainment. It rarely happens that we don’t start flying well before our appointed time of 8.30p.m. and quite often, as happened last night, a number of fliers were in the air from the early starting time of 8p.m. giving them a half hour extra entertainment. Why is it, then, that having been given a reminder at twenty past ten each night, that there is ten minutes remaining, that few commence packing up (a quite large job for some) until right on closing time. The duty manager has a lot to do after we leave and I don’t feel that we should abuse the many privileges that he gives us each night. We had twice as many lights on last night and, with a monthly electricity bill of $7,000 – yes seven thousand dollars – it is not hard to see where a lot of that money is spent. So gentlemen, and in some cases ladies as well, as a personal request from me, could you please make the effort to vacate the place BY 10.30p.m.

Do you remember, dear readers, that a few months ago, Peter Melders demonstrated very adroitly, the exciting flying characteristics (a long word) of his “Tri-copter?” He flew it on two occasions, the second time with slightly larger propellers – this may jolt your memory.

Why am I raising that matter, you may well ask for Peter was not in attendance last night. But – what we did witness, was the exciting demonstration of a slightly similar machine, and please forgive me for not getting the gentleman’s name, but this really stirred the cockles of our hearts. Not only did it have three motors, but this model had four and this amazing quad-machine also had a pair of very bright 6-volt powered headlights which, at least, showed which is the leading edge.

Your scribe – “The Phoenix.”